个人简历

黄佳，特聘副教授，男，湖南益阳人。2009年7月本科毕业于北航飞行器动力工程专业。
2016年1月毕业于北航航空宇航推进理论与工程专业，直博期间参加“2018年航空宇航科学与技术学科全国优秀博士学位论文”评选。
先后荣获2017年度北航校级优秀博士学位论文（“航空宇航与科学技术”第一）、研究生国家奖学金、北航“五四”奖章、北航研究生十佳、北航博士生创新基金和北航研究生辅导员年度标兵等称号。部队服役期间两次荣获嘉奖。
近年来参与和主持包括国家973在内的多项重大科研项目，参与两部专著的编写工作，以第一作者或者通讯作者在IJFatigue，MSEA，Journal of Materials Science等高水平SCI期刊发表论文十多篇。指导研究生获得“中国研究生创新实践系列大赛”：2020年“飞鲨杯”第六届中国研究生未来飞行器创新大赛，一等奖。
【科研项目】
（1）参与“叶/盘结构强度寿命和可靠性设计准则及方法验证”（APXX项目）
（2）参与“某先进航空发动机高压涡轮结构设计及强度分析”（中国商发项目）
（3）主持“复杂载荷条件下镍基高温合金疲劳及蠕变行为研究”（两次主持北航博士研究生创新基金）
（4）主持中南大学人才启动项目一项
（5）主持多项企事业单位横向课题
教育经历
[1] 2010.9-2016.1
北京航空航天大学 | 航空宇航推进理论与工程 | 博士学位 | 博士研究生毕业
[2] 2005.9-2009.7
北京航空航天大学 | 飞行器动力工程 | 学士学位 | 大学本科毕业
工作经历
[1] 2019.11-至今
中南大学 | 航空航天学院 | 特聘副教授
[2] 2016.1-2019.7
中国人民解放军93790部队 | 维修管理办公室 | 助理工程师

研究领域

[1] 高超声速飞行器动力装置及热防护系统研究
[2] 高温合金力学性能标准和损伤机理研究
[3] 航空发动机涡轮叶片结构完整性研究""

近期论文

[1] Jia Huang, Xiaoguang Yang, Duoqi Shi. A simple unified critical plane damage parameter for high temperature LCF life prediction of a Ni-based DS superalloy[J]. Journal of Materials Science, 2014, 49(22): 7625-7638.
[2] Duoqi Shi, Shiwei Han, Xiaoguang Yang, Jia Huang*. Experimental investigation and simulation on stress rupture behavior of a Ni-based DS superalloy affected by initial elastic-plastic multi-axial stress state [J]. Materials Science and Engineering: A, 2019, 757: 124-133.
[3] Hu Xiaoan, Zhao Gaole, Huang Jia*, Wang Xiangyi, and Yang Xiaoguang. Out-of-Phase Thermomechanical Fatigue Behavior of a NiCrAlYSi-Coated Superalloy[J]. Journal of Materials Engineering and Performance, 2019(4).
[4] Shi Duoqi, Huang Jia, Yang Xiaoguang. Effects of Crystallographic Orientations and Dwell Types on Low Cycle Fatigue and Life Modeling of a SC superalloy [J]. International Journal of Fatigue, 2013, 49: 31-39.
[5] Jia Huang, Duoqi Shi, Xiaoguang Yang, Xiaoan Hu. Effect of multi-axial stress state on creep behavior and stress rupture life of a Ni-based DS superalloy[J]. Computational Materials Science, 2014, 85: 20-31.
[6] Jia Huang, Xiaoguang Yang, Duoqi Shi. Systematic methodology for high temperature LCF life prediction of smooth and notched Ni-based superalloy with and without dwells[J]. Computational Materials Science, 2014, 89: 65-74.
[7] Huang Jia, Shi DuoQi, Yang XiaoGuang. Experimental investigation and numerical modeling for elasto-plastic notch-root stress/strain analysis under monotonic loadings[J]. Science China Technological Sciences, 2014, 57(7):1411-1424.
[8] Huang Jia, Shi DuoQi，Yang XiaoGuang. A modern and robust methodology for modeling anisotropic creep characteristics of Ni-based DS and SC superalloys[J]. Science China Technological Sciences, 2014, 57(9): 1802-1815.
[9] Jia Huang, Duoqi Shi, Xiaoguang Yang. A physically based methodology for predicting anisotropic creep properties of Ni-based superalloys[J]. Rare Metals, 2016, 35(8):606-614.
[10] Jia Huang, Duoqi Shi, Xiaoguang Yang. Unified modeling of high temperature deformations of a Ni-based polycrystalline wrought superalloy under tension-compression, cyclic, creep and creep-fatigue loadings[J]. Science China Technological Sciences, 2015, 58(2):248-257.
[11] Huang Jia, Luo Yinyin, Shi Duoqi, Yang Xiaoguang. Experimental investigation on HCF strength affected by predamage from LCF of a near alpha titanium alloy[J]. Journal of Materials Research, 2014, 29(22):2748-2755.
[12] Huang Jia, Luo Yinyin, Shi Duoqi, Yang Xiaoguang. Fatigue response,fracture characteristic and life modeling of a near-alpha titanium alloy under typical cyclic loadings in service[J]. Rare Metals, 2016, 35(9):1-10.
[13] Xiao-An Hu, Gao-Le Zhao, Yun Jiang, Xian-Feng Ma, Fen-Cheng Liu, Jia Huang*, Cheng-Li Dong. Experimental investigation on the LCF behavior affected by manufacturing defects and creep damage of one Selective Laser Melting nickel base superalloy at 815℃. Acta Metallurgica Sinica (English Letters), 2019.
[14] Shiwei Han, Duoqi Shi, Xiaoguang Yang, Jia Huang, Yantao Sun. A hypothetical dislocation well model for kinematic hardening in cyclic plasticity[J]. International Journal of Plasticity, 2018, 110: 220-247.
[15] Han, S., Yang, X., Shi, D., Miao, G., Huang, J., & Li, R. Microstructure-sensitive modeling of competing failure mode between surface and internal nucleation in high cycle fatigue[J]. International Journal of Plasticity, 2019.
[16] ShiWei Han, XiaoGuang Yang, DuoQi Shi, Jia Huang. A reduced-order method for parameter identification of a crystal plasticity model considering crystal symmetry[J]. Science China Technological Sciences, 2019, 62(3): 373-387.
[17] Duoqi Shi, Xiaoan Hu, Jingke Wang, Huichen Yu, Xiaoguang Yang, Jia Huang. Effect of notch on fatigue behaviour of a directionally solidified superalloy at high temperature[J]. Fatigue & Fracture of Engineering Materials & Structures, 2013, 36(12):1288-1297.
[18] Xiaoan Hu, Xiaoguang Yang, Jingke Wang, Duoqi Shi, Jia Huang. A simple method to analyse the notch sensitivity of specimens in fatigue tests[J]. Fatigue & Fracture of Engineering Materials & Structures, 2013, 36(10):1009-1016.
[1] Journal of Physics and Chemistry of Solids 审稿人
[2] 2019.5-至今
Materials Science and Engineering: A 审稿人
[3] Journal of Computational Design and Engineering 审稿人
[4] Materials&Design 审稿人