近期论文
1. Li J F, Lin H, Li J B. Factors that influence the flexural strength of SiC-based porous ceramics used for hot gas filter support. Journal of the european ceramic society, 2011,31(5):825-831.2. Wu J, Lin H, Li J B, et al. Corrosion Behavior of AlNbO4/Mullite Composite as Environmental Barrier Coating in Water Vapor Environment. Journal of inorganic materials, 2010,25(4):445-448.3. Wu J, Lin H, Li J B, et al. Synthesis and Characterization of Electrospun Mullite Nanofibers. Advanced engineering materials, 2010,12(1-2):71-74.4. Li J F, Lin H, Li J B, et al. Influence of lanthanum additive on phase transition, microstructure and lithium ionic conductivity of beta-eucryptite. Materials letters, 2010,64(3):298-300.5. Wu J, Lin H, Li J B, et al. Fabrication and characterization of electrospun mullite nanofibers. Materials letters, 2009,63(27):2309-2312.6. Wu J, Lin H, Li J B, et al. Effect of Precursor pH on One-dimensional Growth of Mullite Prepared by Sol-Gel Method with WO3 Catalyst. Journal of inorganic materials, 2009,24(5):1077-1080.7. Li J F, Lin H, Li J B, et al. Effects of different potassium salts on the formation of mullite as the only crystal phase in kaolinite. Journal of the european ceramic society, 2009,29(14):2929-2936.8. Wu J, Li J B, Lin H, et al. Synthesis and Controlled Growth of Mullite Submicron Powders. Rare metal materials and engineering, 2008,37Suppl. 1:576-579.9. Wu J, Lin H, Li J B, et al. Structural studies of WO3-catalysed mullite. Advanced engineering materials, 2008,10(6):588-591.10. Liang L, Li J B, Guo G F, et al. Preparation of porous ceramic support for inorganic filtration membrane. Rare metal materials and engineering, 2007,36Suppl. 1:579-582.11. Guo G F, Li J B, Kong X Y, et al. Direct measurement of residual stresses and their effects on the microstructure and mechanical properties of heat-treated Si3N4 ceramics II: With CeO2 as a single additive. Acta materialia, 2007,55(9):3245-3251.12. Liang L, Li J B, Lin H, et al. Self-catalyzed growth of nonstoichiometric single-crystal mullite nanocolumns. Advanced engineering materials, 2007,9(3):201-203.13. Liang L, Li J B, Lin H, et al. Self-catalyzed growth of nonstoichiometric mullite nanodiskettes. Materials science and engineering a-structural materials properties microstructure and processing, 2007,448(1-2):154-157.14. Liang L, Li J B, Lin H, et al. Difference of mullite whiskers between ytterbia-doped aluminum hydroxide-silica gel and mechanochemical process. Journal of rare earths, 2006,24(Sp. Iss. SI):51-53.15. He M S, Li J B, Lin H, et al. Fabrication of transparent polycrystalline yttria ceramics by combination of SPS and HIP. Journal of rare earths, 2006,24(Sp. Iss. SI):222-224.16. Yang J, Li J B, Lin H, et al. A novel preparation method for NiCo2O4 electrodes stacked with hexagonal nanosheets for water electrolysis. Journal of applied electrochemistry, 2006,36(8):945-950.17. Guo G F, Li J B, Yang X X, et al. Direct measurement of residual stresses and their effects on the microstructure and mechanical properties of heat-treated Si3N4 ceramics. Acta materialia, 2006,54(9):2311-2316.18. Tong X G, Li J B, Yang X Z, et al. Mechanical property and oxidation behavior of self-reinforced Si3N4 doped with Re2O3 (Re = Yb, Lu). Journal of the american ceramic society, 2006,89(5):1730-1732.19. Yang J, Li J B, Lin H, et al, A novel method for preparing NiCo2O4 electrodes stacked with hexagonal nanosheets for water electrolysis, UK220/05, J. Appl. Electrochem. 36 (8): 945-950 AUG 200620. Chi B, Li JB, Yang XZ, et al,Electrophoretic Deposition of ZnCo2O4 Spinel and its Electrocatalytic Properties for Oxygen Evolution Reaction, Electrochim. Acta, 50 : 2059–2064 2005
